Smart-Phone Friendly Shopping Cart

-- SCROLL DOWN TO SELECT & ORDER YOUR ITEMS --
===============================

- We reserve the right to refuse service to anyone. That includes a right to cancel and fully refund any incoming order at our sole discretion -
- We don't sell to other Web retailers who we consider to be direct competitors-
- We reserve the right to ship reduced quantities, and refund any difference in total price, if we have inadequate inventory to completely fill an order - (We NEVER do back-orders!)
- We are not responsible for orders that are lost or delayed in receipt, due to us receiving an outdated or incorrect shipping address with the PayPal payment


DUE TO SHIPMENT THEFTS & DESTRUCTION, WE NO LONGER SHIP TO: MEXICO, ITALY, PORTUGAL, SPAIN, ANY COUNTRIES OF THE FORMER SOVIET UNION, OR ANY CENTRAL OR SOUTH AMERICAN COUNTRIES. ORDERS PLACED FROM ANY OF THESE EXCLUDED COUNTRIES WILL BE REFUNDED.

MINIMUM INTERNATIONAL ORDER: Our minimum international order is $10.00 worth of goods, exclusive of shipping.  Orders that fail to meet this minimum will be fully refunded.


SHIPPING METHODS
: All of our domestic and our international orders ship exclusively via the U.S. Postal Service. We do NOT use UPS or FedEx, sorry!

SPEED OF ORDER FULFILLMENT: Most orders that we receive from PayPal by 4 p.m. on a business day will ship that same day. Orders that are placed through PayPal after 4 p.m., or on a weekend, or on a holiday, will ship the next business day.

RUSH SHIPPING: Sorry, but we no longer provide RUSH shipping services. There are no exceptions.

SNAIL MAIL ORDERS: For mail orders, print out this page in your printer's "portrait" (vertical page) orientation and fill in the details by hand. Or, you can have the shopping cart tally up your order for you and then print out your order summary, rather than paying for it through PayPal. Snail-mailed orders that do not include 15% in shipping fees will be rejected and returned to the customer submitting them. We are not responsible for the loss of those rejected orders, during their return snail-mail shipment to the person submitting them.

Click on the View Cart button below to view your shopping cart, at any time that you wish to check its contents.

 

Item

Description

Unit

Unit
Price

Add to Shopping Cart?

SECTION 1

Professional Connection Kits

Please note that all of these kits are pre-packaged items. We do not offer component substitutions in any kit. Piece parts are listed further down the page, to allow creation of your own unique connection kit.

CRITICAL NOTE: The kits that are listed below and the crimp terminals that they're based on are designed for installation with an open-barrel crimping tool! Neither crimping them with needle-nose pliers and/or soldering them are acceptable alternatives to a proper installation. Those jury-rigged types of incorrect installations will void the manutacturer's warranty for the terminals, from the time the terminals are initially  installed. You need to either already possess an open barrel crimping tool of your own, borrow one, or buy one (either here or elsewhere). If you're not going to properly install these OEM-style terminals, then YOU ARE WASTING YOUR MONEY BY BUYING THEM! Any cheap poor-quality junk electrical terminals will do just fine, if you're going to do a sloppy amateurish installation of them.
 


CK-1
(Click HERE for kit details)
 

Single-Bike Connection Kit
(includes $10 discounted RTL crimper)
 

1

$55.00



 

Single-Bike Connection Kit
(without RTL crimper)
 

1

$30.00


 

CK-2
(Click HERE for kit details)
 

Multiple-Bike Connection Kit
(includes $10 discounted RTL crimper)
 

1

$85.00


 

 
Multiple-Bike Connection Kit
(without RTL crimper)
 

1

$60.00


 

 

CK-
4L (Latching Housings)

(Click HERE for kit details)

 


Multi-Pin Latching Nylon-Block Connection Kit
Based on standard 6.3mm spade terminals
(includes $10 discounted RTL crimper)

 


1

$80.00


 


 


Multi-Pin Latching Nylon-Block Connection Kit
Based on standard 6.3mm spade terminals
(without RTL crimper)
 


1

$55.00


 


CK-
4N (Non-Latching Housings)

For under-hood use in early Datsuns and also for other vintage Japanese cars, trucks, & bikes. (Click HERE for kit details)
 


Multi-Pin Non-Latching Nylon-Block Connection Kit Based on standard 6.3mm spade terminals
(includes $10 discounted RTL crimper)


1

$80.00


 


See applications note immediately above.


Multi-Pin Non-Latching Nylon-Block Connection Kit Based on standard 6.3mm spade terminals
(without RTL crimper)
 


1

$55.00


 

 

CK-5L

(Click HERE for kit details and photos)


OEM-type Multi-Pin Latching Nylon-Block Connection Kit
Based on 2.8mm OEM spade terminals. Also suits other makes/models of Japanese bikes, cars, and trucks, in addition to Honda.
(includes $10 discounted RTL crimper)

 


1

$75.00


 


 


OEM-type Multi-Pin Latching Nylon-Block Connection Kit
Based on 2.8mm OEM spade terminals. Also suits other makes/models of Japanese bikes, cars, and trucks, in addition to Honda.
(without RTL crimper)

 


1

$50.00


 


CK-5N

For under-dash use in early Datsuns and also for use in other vintage Japanese cars, trucks, & bikes. (Click HERE for kit details and photos)
 


OEM-type Multi-Pin Non-Latching ABS- Plastic Block Connection Kit
Based on 2.8mm automotive spade terminals. Also suits other makes/models of Japanese bikes,  cars, and trucks, in addition to Suzuki and Datsun.
(includes $10 discounted RTL crimper)

 


1

$75.00


 


See applications note immediately above.


OEM-type Multi-Pin Non-Latching ABS-Plastic Block Connection Kit.
Based on 2.8mm automotive spade terminals. Also suits other makes/models of Japanese bikes,  cars, and trucks, in addition to Honda.in addition to Honda.
(without RTL crimper)

 


1

$50.00


 

 


SECTION 2

Open-Barrel Crimp Terminals

(Insulators Are Included, if Noted in Item Description)
 


SB1 & SB2 look the same and vary only in outer diameter.
 


SB1
(18-16 AWG)
These terminals actually measure 3.85mm in OD. But, they are ALWAYS referred to in the electrical trade as 4mm bullet terminals.

Standard size for most 60's to mid-70's Hondas. (Do NOT order for any models of Honda SOHC fours, from 1969 on. Order SB2, below.)
 


4mm (0.152") Brass Bullet Terminal + Insulator.
($0.19 each)
 


25


$4.75



Don't know for sure which size you need? Neither do I. MEASURE THEM!

4mm Brass Bullet Terminal + Insulator. ($0.125 each)
 


100


$12.50


 
4mm Brass Bullet Terminal + Insulator. ($0.096 each)
 


250


$25.00


 

SB2
 (20-18 AWG)
These terminals actually measure 3.45mm in OD. But, they are ALWAYS referred to in the electrical trade as 3.5mm bullet terminals.

Standard size for all Honda SOHC fours, 70's Honda turn signals, and Honda 90cc's and mopeds.
 

3.5mm (0.136") Brass Bullet Terminal + Insulator.
($0.19 each)


25


$4.75



Don't know for sure which size you need? Neither do I. MEASURE THEM!

3.5mm Brass Bullet Terminal + Insulator. ($0.125 each)
 


100


$12.50


 
3.5mm Brass Bullet Terminal + Insulator. ($0.096 each)
 


250


$25.00




SS1 & SS2 look the same and vary only in inner diameter
 

SS1
(18-16 AWG) -
Standard size for most 60's to mid-70's Hondas. (Do NOT use for any models of Honda SOHC fours, from 1969 on. Order SS2, below.)
 

4mm (0.157") Brass Socket Terminal + Insulator.
($0.19 each)

 


25


$4.75



Don't know for sure which size you need? Neither do I. MEASURE THEM!

4mm Brass Socket Terminal + Insulator. ($0.14 each)
 


100


$14.00


 
4mm Brass Socket Terminal + Insulator. ($0.12 each)
 


250


$30.00


 

SS2
 (20-18 AWG) - For all Honda SOHC fours, 70's Honda turn signals, and Honda 90cc's and mopeds.
 

3.5mm (0.138") Brass Socket Terminal + Insulator.
($0.19 each)


25


$4.75



Don't know for sure which size you need? Neither do I.  MEASURE THEM!

3.5mm (0.138") Brass Socket Terminal + Insulator.
($0.14 each)

 


100


$14.00


 
3.5mm (0.138") Brass Socket Terminal + Insulator.
($0.12 each)

 


250


$30.00




4mm Dual-Socket Terminal
 

DS1
 (18-14 AWG)
Unavailable as a 3.5mm ID part

(NOT a female spade terminal)
 

4mm (0.157") Tinned Brass Dual Socket Terminal + Insulator.
($0.50 each)
 


5


$2.50


 
4mm Tinned Brass Dual Socket Terminal + Insulator.
($0.45 each)

 


10


$4.50


 
4mm Tinned Brass Dual Socket Terminal + Insulator.
($0.36 each)

 


25


$9.00


 
4mm Tinned Brass Dual Socket Terminal + Insulator.
($0.35 each)

 


50


$17.50


 
4mm Tinned Brass Dual Socket Terminal + Insulator.
($0.34 each)

 


100


$34.00


 
4mm Tinned Brass Dual Socket Terminal + Insulator.
($0.316 each)

 


250


$79.00




TS1 4mm Triple-Socket Terminal: Four leads into one. Also adaptable for three leads into one and two leads into one (Y-connector). Comes complete with a clear molded insulator, as illustrated above.
 

TS1
 (18-14 AWG)
(Do NOT use this part for any models of Honda 750-4, from 1969 on. Order TS2, below.)
 

4mm (0.157") Tinned Brass 4mmTriple Socket Terminal + Insulator.
($0.60 each)
 


5


$3.00




 

Tinned Brass 4mm Triple Socket Terminal + Insulator.
($0.55 each)
 


10


$5.50



 

Tinned Brass 4mm Triple Socket Terminal + Insulator.
($0.48 each)
 


25


$11.00


 



TS2 3.5mm ID Triple-Socket Terminal

Three leads into one. Also adaptable for two leads into one (Y-connector). There is no molded insulator available for this terminal from any of our suppliers.

You cannot crimp this terminal with our tool. You must hand crimp it using needle-nose pliers and then touch the manual crimp with a small bead of solder. You can insulate it with a short length of 1/2" or 5/8" ID heat shrink tubing.
 

TS2
(20-18 AWG)
Use for both dual- and triple-socket applications on Honda inline fours. Can easily be insulated with heat-shrink tubing.

DISCONTINUED BY THE FACTORY
 


3.5mm (0.138") Brass Triple Socket Terminal ($0.60 each)


5


$3.00


 

 
3.5mm Brass Triple Socket Terminal ($0.50 each)
 


10


$5.00


 

 
3.5mm Brass Triple Socket Terminal ($0.40 each)
 


25


$10.00


 



Solid Brass Ring Terminals
Sorry for the pricing here, but these automotive-quality
ring terminals are our most difficult terminal to source and
they cost us the most each at wholesale. For some reason,
they're very expensive to manufacture in automotive quality.

 

BE4
(18-16 AWG)
 

4.5mm I.D. Brass Ring Terminal for ground leads.
($0.30 each)
 


10


$3.00




 

Same description as above.
($0.24 each)
 


25


$6.00



BE5
(18-16 AWG)
 

5.5mm I.D. Brass Ring Terminal for coil leads.
($0.30 each)
 

10

$3.00



 

Same description as above.
($0.24 each)
 

25

$6.00



BE6
(18-16 AWG)
 

6.5mm I.D. Brass Ring Terminal, for cycle battery connections to 20-16 AWG wires.
($0.30 each)
 

10

$3.00


 



 

Same description as above.
($0.24 each)
 

25

$6.00


 





M28OEM/Auto, for use with both OEM Honda
& Automotive female spade terminals (22-18 AWG)
SHOWN ON RIGHT IN PHOTO ABOVE

2.8mm (0.110") Brass Male Spade, locking, as used in our latching HP-Series housings. ($0.20 each)
 

10

$2.00


 
Same description as above.
($0.16 each)
 

25

$4.00


 
Same description as above.
($0.112 each)
 

100

$11.20






F28OEM
(22-18 AWG)
SHOWN ON LEFT IN PHOTO ABOVE

2.8mm (0.110") Brass Female Spade, locking, as used in our HP-series latching housings. See Note 1, below.
($0.35 each)
 

10

$3.50


 
Same description as above.
($0.22 each)
 

25

$5.50


 
Same description as above.
($0.15 each)
 

100

$15.00




 

F28 Automotive
(22-18 AWG)
SHOWN ON LEFT IN PHOTO ABOVE

2.8mm (0.110") Brass Female Spade, locking, as used in our HP-series non-latching housings. Ideal for early Japanese auto applications... Datsun 240Z, 510, Honda CVCC, Toyota Corona, etc.
($0.20 each)
 

10

$2.00


 
Same description as above.
($0.16 each)
 

25

$4.00


 
Same description as above.
($0.11 each)
 

100

$11.20




 


M63
(18-14 AWG)
SHOWN ON RIGHT IN PHOTO ABOVE

6.3mm (1/4") Brass Male Spade, locking, as used in all of our latching and non-latching MP-Series housings.
($0.25 each)
 

10

$2.50


 
Same description as above.
($0.20 each)
 

25

$5.00




 

M63
(14-12 AWG)
SHOWN ON RIGHT IN PHOTO ABOVE

Tin-plated heavy duty 6.3mm (1/4") Brass Male Spade, locking, as used optionally in both our latching and non-latching MP-Series housings, when larger AWG wires are used.
($0.30 each)
 

10

$3.00


 
Same description as above.
($0.24 each)
 

25

$6.00





 


F63
(18-14 AWG)
SHOWN ON LEFT IN PHOTO ABOVE

Low insertion force 6.3mm (1/4") brass Female Spade, locking, as used in both our latching and non-latching MP-Series housings.
($0.25 each)
 

10

$2.50


 
Same description as above.
($0.20 each)
 

25

$5.00




Fits 18-14 AWG male/female spades only...
will NOT fit over some 14-12 AWG wires

 


F63S
(18-14 AWG)

Above photo of a sleeve in use is  FOR ILLUSTRATION PURPOSES ONLY.

These sleeves do NOT include any female  6.3mm spade terminals. You must order your F63 spade terminals on the lines preceding the illustration.
 


F63S Clear PVC sleeve for 6.3mm (1/4") brass female spade, locking, as used in our non-latching MP-Series housings.
($0.18 each)
 

10

$1.80


 

 


Same description as above.
($0.14 each)
 

25

$3.50




 

F63
(14-12 AWG)
SHOWN ON LEFT IN PHOTO ABOVE

Tin-plated heavy duty 6.3mm (1/4") brass Female Spade, locking, as used optionally in both our latching and non-latching MP-Series housings, when larger AWG wires are used.
($0.30 each)
 

10

$3.00


 
Same description as above.
($0.24 each)
 

25

$6.00


 


SECTION 3

OEM Multi-pin 2.8mm Spade-Based Latching Nylon Connector Pairs
For 22-18 AWG Applications
( See Note 2 below)



HP2L Latching Set
White Nylon
 


2-pin 2.8mm (0.110") spade-based latching M/F Nylon Connector Shell Pair, with 3 each M28OEM & F28OEM crimp terminals

1

$2.00

 


HP3L Latching Set
White Nylon
 


3-pin 2.8mm (0.110") spade-based latching M/F  Nylon Connector Shell Pair, with 4 each M28OEM & F28OEM crimp terminals

1

$2.25



HP4L Latching Set
Red Nylon
 


4-pin 2.8mm (0.110") spade-based latching M/F Nylon Connector Shell Pair, with 5 each M28OEM & F28OEM crimp terminals

1

$2.50



HP4L Latching Set
White Nylon
 


4-pin 2.8mm (0.110") spade-based latching M/F Nylon Connector Shell Pair, with 5 each M28OEM & F28OEM crimp terminals

1

$2.50



HP6L Latching Set
White Nylon
 


6-pin 2.8mm (0.110") spade-based latching M/F Nylon Connector Shell Pair, with 7 each M28OEM & F28OEM crimp terminals

1

$3.00



HP9L Latching Set
White Nylon
 


9-pin 2.8mm (0.110") spade-based latching M/F Nylon Connector Shell Pair, with 10 each M28OEM & F28OEM crimp terminals

1

$3.75


 


SECTION 4

OEM Multi-pin 2.8mm Spade-Based
Non-Latching Connector Pairs
For 22-18 AWG Applications
( See Note 2 below)



HP2N Non-Latching Set
Beige ABS
 


2-pin 2.8mm (0.110") spade-based non-latching M/F ABS Connector Shell Pair, with 3 each M28/F28 crimp terminals (Beige only)

Correct for early Datsun under-dash use.

1

$2.00


 


HP3N Non-Latching Set
Beige ABS
 


3-pin 2.8mm (0.110") spade-based non-latching M/F ABS Connector Shell Pair, with 4 each M28/F28 crimp terminals (Beige only)

Correct for early Datsun under-dash use.

1

$2.25



HP4N Non-Latching Set
Beige ABS
 


4-pin 2.8mm (0.110") spade-based non-latching M/F ABS Connector Shell Pair, with 5 each M28/F28 crimp terminals (Beige only)

Correct for early Datsun under-dash use.

1

$2.50



HP6N Non-Latching Set
Beige ABS
 


6-pin 2.8mm (0.110") spade-based non-latching M/F  ABS Connector Shell Pair, with 7 each M28/F28 crimp terminals (Beige only)

Correct for early Datsun under-dash use.

1

$3.00



HP9N Non-Latching Set
Beige ABS
 


9-pin 2.8mm (0.110") spade-based non-latching M/F ABS
Connector Shell Pair, with 10 each M28/F28 crimp terminals (Beige only)

Correct for early Datsun under-dash use.

1

$3.75


 


SECTION 4A

High Quality Reproduction Black Rubber Connector Pair
for 4mm M/F Brass Bullet/Socket Terminals
ONLY Rated For Safe Use In 18-16 AWG Applications
 


HC2 Connector Set
Black Rubber
 


2-pin 4mm (0.157") black rubber connector pair, with three each M/F 4mm bullet/socket terminals.

Suitable for Kawasaki Triples, 70's Suzuki headlight and CDI connections, vintage snowmobiles, and various other specialty applications.

1

$7.00


 


HC3 Connector Set
Black Rubber
 


3-pin 4mm (0.157") black rubber connector pair, with four each M/F 4mm bullet/socket terminals.

Suitable for Kawasaki Triples, 70's Suzuki headlight and CDI connections, vintage snowmobiles, and various other specialty applications.

1

$8.00


 

 


SECTION 5

White Nylon
Latching Multi-Pin Connector Pairs for 6.3mm Spades
For 18-12 AWG Applications

 



MP1L Latching Set
 

1-pin latching 6.3mm (1/4") spade-based M/F Connector Shell Pair, with 2 each 18-14 AWG, M63/F63 crimp terminals. Plain Nylon.

1

$1.00


 


No photo currently available.

 Looks the same as MP1L Latching Set above, but without the latch mechanism.

MP1N Non-Latching Set
 


1-pin non-latching 6.3mm (1/4") spade-based M/F Connector Shell Pair, with 2 each 18-14 AWG, M63/F63 crimp terminals. Plain Nylon.

1

$1.00


 




MP2TL Latching Set
 

2-pin latching 6.3mm(1/4") spade-based M/F Connector Shell Pair, with 3 each 18-14 AWG, M63/F63 crimp terminals. T-Configuration. Plain Nylon.

1

$1.25





MP2TN Non-Latching Set
 

2-pin 6.3mm (1/4") spade-based non-latching M/F Connector Shell Pair, with 3 each 18-14 AWG, M63/F63 crimp terminals. T-Configuration. White Nylon.

1

$1.25





MP3L Latching Set
 

3-pin latching 6.3mm (1/4") spade-based M/F Connector Shell Pair, with 4 each 18-14 AWG, M63/F63 crimp terminals. T-Configuration (2 vertical, 1 horizontal). Plain Nylon.

1

$1.50





MP3N Non-Latching Set
 

3-pin 6.3mm (1/4") spade-based non-latching M/F Connector Shell Pair, with 4 each 18-14 AWG, M63/F63 crimp terminals. T-Configuration (2 vertical, 1 horizontal). Plain Nylon. Directly replaces original Hitachi non-latching housings from the 1960s-1980s.

1

$1.75





MP4L Latching Set
 

4-pin latching 6.3mm (1/4") spade-based M/F Connector Shell Pair, with 5 each 18-14 AWG, M63/F63 crimp terminals. Plain Nylon.

1

$1.75





MP4N Non-Latching Set

4-pin 6.3mm (1/4") spade-based non-latching M/F Connector Shell Pair, with 5 each 18-14 AWG, M63/F63 crimp terminals. White Nylon. Directly replaces original Hitachi non-latching housings from the 1960s-1980s.

1

$2.00


 




MP6L Latching Set
 


6-pin latching 6.3mm (1/4") spade-based M/F Connector Shell Pair, with 7 each 18-14 AWG, M63/F63 crimp terminals. Plain Nylon.


1

$2.50





MP6N Non-Latching Set
 


6-pin 6.3mm (1/4") spade-based non-latching M/F Connector Shell Pair, with 7 each 18-14 AWG, M63/F63 crimp terminals. White Nylon. Directly replaces original Hitachi non-latching housings from the 1960s-1980s.

 


1

$2.50





MP8L Latching Set
 


8-pin latching 6.3mm (1/4") spade-based M/F connector housing pair, with 9 each M63/F63 18-14 AWG crimp terminals. Plain white nylon.


1

$3.50



No photo currently available.

 Looks the same as MP6N Non-Latching Set above, but with two more openings for terminals.

MP8N Non-Latching Set
 


8-pin non-latching 6.3mm (1/4") spade-based M/F connector housing pair, with 9 each M63/F63 18-14 AWG crimp terminals. Plain white nylon. Directly replaces original Hitachi 8-pin non-latching housings from the 1960s-1980s.


1

$3.50


 


SECTION 6

Factory-Style Soft High-Gloss Black Sleeving

 
 


 

NOTE:
 This is soft, high-gloss PVC sleeving that is identical in color, surface finish, inner diameter, and wall thickness to the vinyl sleeving that was used originally by the factory. It is NOT heat shrink tubing.

All sizes of our sleeving are sold in continuous lengths, up to a maximum continuous length of 20 feet. Continuous lengths of greater than 20 feet are simply too unwieldy for packing/shipping purposes.

If you enter a quantity of "6" (feet) in the shopping cart, you get six continuous feet, not six pieces that are each one-foot long. If you enter "40" (feet), you get two 20-foot lengths.

 


B06

Nominal 6mm (0.24") I.D. High-Gloss Black PVC Sleeving for handlebar controls (priced per running foot in continuous lengths of up to 20 feet)
 

1

$.70

 


B07

Nominal 7mm (0.28") I.D. High-Gloss Black PVC Sleeving (priced per running foot in continuous lengths of up to 20 feet)
 

1

$.80

 

B11


 

Nominal 11mm (0.43")I.D. High-Gloss Black PVC Sleeving (priced per running foot in continuous lengths of up to 20 feet)
 

1

$1.25

 

B14


NOTE: This size of sleeving is BULKY! International purchasers of 20-foot, or longer, lengths of this size of sleeving, MAY be subject to shipping surcharges for the cost of the special tubing shipment cartons that are needed for such shipments.
 


Nominal 14mm (0.63") I.D. High-Gloss Black PVC Sleeving (priced per running foot in continuous lengths of up to 20 feet)
 

1

$1.35


 

 


SECTION 7

OEM Bridgestone/Honda/Suzuki Factory-Style
Soft Silver-Gray PVC Metric Sleeving

 
 


 

NOTE:
Our reproduction metric sleeving is custom manufactured for us in Asia. This soft, silver-gray PVC sleeving is identical in color, inner diameter, and wall thickness to the vinyl sleeving that was used originally by the factory. It is NOT heat shrink tubing, nor do we recommend that heat shrink tubing ever be used for an accurate restoration of antique Japanese bikes.

All sizes of our sleeving are sold in continuous lengths, up to a maximum continuous length of 20 feet. Continuous lengths of greater than 20 feet are simply too unwieldy for packing/shipping purposes.

If you enter a quantity of "6" (running feet) in the shopping cart, you get six continuous feet, not six pieces that are each one-foot long. If you enter "40" (feet), you get two 20-foot lengths.

CRUCIAL NOTE: This sleeving is custom made for us and the minimum extrusion length for a manufacturing run is about 5,000 feet (a little less than one mile) of a single ID. The sleeving varies slightly in hue, gloss, and ID, from one run to the next. So, if you're a perfectionist who wants tight reproducibility from one small application you make, to the next one, you should buy 10-20 feet at once, so it all comes from the same coil.

Also, sleeving is a functional item, not a dress-up item (like paint or chrome). It's not intended to be "pretty;" but it beats heat shrink tubing by a mile for color and authenticity on certain Sixties/Seventies Japanese bikes!

 


S05

Nominal 5mm (0.197") I.D. Silver-Gray PVC Sleeving for handlebar controls (priced per running foot in continuous lengths of up to 20 feet)
 

1

$1.00

 


S06

Nominal 6mm (0.24") I.D. Silver-Gray PVC Sleeving (priced per running foot in continuous lengths of up to 20 feet)
 

1

$1.25

 

S08
Nominal 8mm (0.32") I.D. Silver-Gray PVC Sleeving (priced per running foot in continuous lengths of up to 20 feet)
 

1

$1.50


 

S12

NOTE: This size of sleeving is BULKY! International purchasers of 10-foot, or longer, lengths of this size of sleeving, MAY be subject to a $4.00 shipping surcharge for the cost of the special shipping cartons that are required for such bulky shipments.
 

Nominal 12mm (0.47") I.D. Silver-Gray PVC Sleeving (priced per running foot in continuous lengths of up to 20 feet)
 

1

$2.00


 


SECTION 8

High Quality
Electrical Tape

 

RTP
 

OEM-Quality Silver-Gray PVC electrical tape [Roll = 18mm wide x 25 meters long]
A faithful reproduction of the original factory tape used by Sumitomo for Honda, Suzuki, & Bridgestone wiring harnesses.
 

1

$6.50


 


STP

Professional-Quality 3M Scotch-brand Super 33+ black vinyl electrical tape
[Roll = 3/4" wide x 66 feet long]
One of the world's best electrical tapes.
 

1

$6.50


 


SECTION 9

Hand Tools

 


RTL Crimping Tool

 


Ergonomic Ratcheting Crimping Tool (with instruction sheet and standard open-barrel die set)
 


1


$35.00

 


     - DSB Optional Die Set

 


Supplemental die set "B" for closed-barrel terminals (Click here for details)
 


1


$12.00

 


     - DSc Optional Die Set

 


Supplemental die set "C" for closed-barrel terminals (Click here for details)
 


1


$12.00

 


     - DSD Optional Die Set

 


Supplemental die set "D" for miniature red-blue-yellow insulated terminals (Click here for details)
 


1


$12.00

 


     - DSE Optional Die Sets, All

 


All three die sets (B,C,D) at a $6.00 total discount. (Click here for details)
 


1


$30.00

 


STL Wire Stripper

 


Wire Stripping and Gauging Tool, Channellock Model 958


1


$15.00

 

ETL1 Terminal Extraction Tool
 

Terminal Extraction Tool for 2.8mm Locking Spade Terminals     
 


1


$7.50


 

ETL2 Terminal Extraction Tool
Terminal Extraction Tool for 6.3mm Locking Spade Terminals     
 


1


$7.50


 

ETL3 Terminal Extraction Tool Set (2 Separate Tools)
Terminal Extraction Tool Set for both 2.8mm and 6.3mm Locking Spade Terminals. Both tools at a modest discount.    
 


1


$13.00


 


Packing & Shipping

Orders placed online with the PayPal Shopping Cart will have their shipping fees calculated automatically, during checkout.

Please e-mail us for exact postal charges before snail-mailing an international order. The PayPal Shopping Cart will automatically calculate shipping charges for most international online orders.

If you're snail-mailing your domestic order to us, add 15% at the right-hand end of this line to cover packing and shipping. Orders snail-mailed to us that do not include packing/shipping fees will be returned unfilled.

 

     
TOTAL        

 Note 1:  You need only use these expensive female spades in our HP-Series latching housing pairs, such as those that ship in our CK-5 kit.

Note 2:  All our 3.5mm and 4mm bullet/socket connectors come paired with a matching insulator and are packaged in zip closure bags. Block connectors come as M/F housing pairs, complete with the matching complement of 2.8mm or 6.3mm M/F spade connectors. We include one extra spade connector of each gender in the bag with each housing pair, to allow you to make a mistake during installation. If you think you might make more than one mistake, buying one packet of 10 pieces of each gender of spade terminal at the time you order is good insurance.

Please submit your completed order form, along with your mailed payment. You may pay in U.S. dollars by personal check, bank draft, or postal money order, made payable to Del Gundlach. Please do not send cash.

Vintage Connections
40087 Mission Boulevard, #212
Fremont, CA   94539
USA

Please provide either your email address or U.S. phone number, below, in case of problems with your order:

____________________________________________________________

Ship to:

Name:_______________________________________________________

Address:____________________________________________________

Address Line 2:_____________________________________________

Address Line 3:_____________________________________________

Address Line 4:_____________________________________________

Address Line 5:_____________________________________________

Country (if other than the U.S.):___________________________

 

Questions? Click on our e-mailbox to mail us!